KTM 690 Duke Owner's Manual page 137

17 SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
B00990-10
–
Insert the oil filter.
–
Oil the O-rings of the oil filter covers. Mount oil filter covers
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
B00991-10
–
Remove screw plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing area.
B00992-10
 . Remove the oil filter cover

out of the oil filter housing.
 
with oil screen
 with the O-ring.
 
and
M5x16 6 Nm (4.4 lbf ft)
and the O-rings.
135
.