KTM 690 Duke Owner's Manual page 66

Hide thumbs Also See for 690 Duke:
Table of Contents

Advertisement

9
SERVICE SCHEDULE
Check the steering head bearing play.
Change the spark plugs.
Check the valve clearance.
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Change the air filter. Clean the air filter box.
Check the fuel pressure.
Check the CO adjustment with the KTM diagnostics tool.
Check/rectify the fluid level of the hydraulic clutch. (
Check the screws and nuts for tightness.
Change the front brake fluid.
Change the rear brake fluid.
Check the headlight setting. (
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory using the KTM diagnostics tool after a test ride.
Make the service entry in the KTM Dealer.net and in the Service and Warranty Booklet.
One-time interval
Periodic interval
p. 123)
p. 80)
p. 121)
Every 20,000 km (12,428 mi) or every 2 years
Every 10,000 km (6,214 mi) or annually
Once after 1,000 km (621.4 mi)
64

Advertisement

Table of Contents
loading

Table of Contents