Canon MX390 series Online Manual page 91

Hide thumbs Also See for MX390 series:
Table of Contents

Advertisement

1300
Cause
Paper is jammed in the paper output slot.
Action
If you can see the jammed paper at the paper output slot, remove the paper following the procedure
below.
Important
The power cannot be turned off while the machine is sending or receiving a fax, or when the
received fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the
power cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
Note
If you need to turn off the machine to remove jammed paper during printing, press the Stop
button to cancel print jobs before turning off the machine.
1.
Pull the paper out slowly.
Hold the paper with your hands, then pull the paper out slowly not to tear it.
Important
Do not pull the paper out from the front tray even though you can see the jammed paper at
the front tray. Pulling the paper out forcibly from the front tray may damage the machine.
Note
If you cannot pull the paper out, turn the machine off and turn it back on. The paper may be
ejected automatically.
If you cannot pull the paper out from the paper output slot, try to pull the paper out from the
transport unit.
1303
If the paper tears and you cannot remove the jammed paper from the paper output slot,
open the paper output cover to remove the paper.
Paper Is Jammed inside the Machine
2.
Reload the paper, and press the OK button on the machine.
If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if
necessary.
Note
When reloading the paper, confirm that you are using the paper suited for printing and are
loading it correctly.
We recommend you use paper other than A5 sized one to print documents with photos or
graphics; otherwise, the printout may curl and cause paper exit jams.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents