Ac Power Operation - Hyundai RAC 878 BG Instruction Manual

AC POWER OPERATION

Before connecting to the power supply ensure that the supply corresponds to the information on
the making plate at back of the apparatus: 230V~50Hz.
WARNING
Disconnect the mains plug from the supply socket when not in use. To avoid the risk of electric
shock do not remove the cover of the apparatus. There are no user serviceable parts inside.
To prevent fire or shock hazard do not expose the apparatus to rain or moisture.
CLOCK
1) Set the ON/OFF/AUTO/BUZZ Switch (1) to „OFF". Connect the Mains Cord to the power
supply. The clock display will flash on and off indicating a power interruption and that the dis-
play time is incorrect.
2) To set the correct time, press the Time Set Button (6) and Minute Set Button (10), or Hour
Set Button (9), together, until the correct time is displayed.
3) Open the Clock Battery Compartment door and fit a 006P (or equivalent) 9V battery. The
purpose of this battery is to store the information relating to alarm time, and to keep the
clock functioning in the event of disconnection from the mains supply or power interruption.
Should this occur, the clock will continue to keep time, but will not display.
TIME SETTING FOR PROJECTION
To preset the HOURS, press stimulaneously the HOUR BUTTON and the TIME BUTTON.
-
And keep them depressed until the hour digits to be preset are displayed.
To preset the MINUTES, press stimulaneously the MINUTE BUTTON and the TIME BUTTON,
-
and keep them depressed until minute digits to be preset the displayed.
ALARM
1) To set the Alarm time, press the Alarm Set Button (5) and Minutes Set Button (10), or Hour
Set Button (9), together until the required alarm time is displayed.
2) Set the ON/OFF/AUTO/BUZZ Switch (1) to BUZZ, the Auto indicator (3) will illuminates. The
alarm is now set to activate at the required time.
3) The alarm can be temporarily stopped for 9 minutes by pressing the Snooze/Sleep off But-
ton (4). This can be repeated up to 5 times.
4) The alarm will activate again after 24 hours uniess the ON/OFF/AUTO/BUZZ Switch (1) is
set to „OFF".
ALARM OFF
When the alarm works, just press the ALARM OFF" Button to end Alarm working.
ENG - 19
ENG