Install The Batteries - HP Photosmart M417 User Manual

2. Install the Batteries

1. Open the Battery/Memory card
door on the side of the camera by
sliding the door toward the bottom
of the camera.
2. Insert the batteries as indicated
inside the door.
3. Close the Battery/Memory card
door by pushing the door down and
sliding the door toward the top of
the camera until the door latches.
For the performance of Alkaline,
Lithium, and NiMH batteries when used
with this camera, see Performance per Battery Type on
page 148. For hints on optimizing battery performance, see
Appendix A, Managing Batteries, starting on page145.
TIP: You can also use an optional HP AC power adapter to
power the camera. If you use rechargeable NiMH
batteries, you can recharge the batteries in the camera
using the optional HP AC power adapter or the optional
HP Photosmart M-series dock, or recharge the batteries
separately in the optional HP Photosmart Quick
Recharger. For more information, see Appendix B,
Purchasing Camera Accessories, starting on page155.
Getting Started 11