Turning The Power On And Specifying A Language - Canon LBP6780x Manual

0978-02K

Turning the Power On and Specifying a Language

When the printer is turned ON, the initial setting screen appears.
Specify the setting using the following procedure.
NOTE
About the initial setting screen
The initial setting screen is displayed only when the printer is turned ON for the first time.
1
Press the power switch to turn the printer ON.
The indicators and display on the control panel come on, and the printer initiates a self-diagnostic test on the printer
unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the Main Power indicator (green),
(Online) indicator (green) and Paper Source indicator (green) come on, <Ready to print.> appears in the display, and
the printer is ready to print.
IMPORTANT
Do not turn the printer ON immediately after turning it OFF.
If you want to cycle the power of the printer, wait at least 10 seconds before turning it ON again.
If the printer does not operate properly
"Troubleshooting"
If an error message appears in the display on the control panel
"A Message Appears in the Control Panel"
When turning ON the printer for the first time after installing the printer and paper feeder
Do not load paper in the paper drawer.
"Printer Installation"
Precautions when turning OFF the printer
(Ready) indicator (green),