Performing The Configuration Using The Printer's Control Panel (When You First Set It Up) - Canon LBP6780x Manual

0978-07L
Performing the Configuration Using the Printer's Control Panel (When
You First Set it Up)
When configuring the interface using the printer's control panel, use the following menu hierarchy.
*1
[Communication Mode] and [Ethernet Type] are displayed when [Auto Detect] is set to [Off].
*2
[Communication Mode] appears only when [Ethernet Type] is set to a setting other than [1000 Base-T].
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After performing the configuration
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [ ] ( : Back).
About the control panel
For details on the control panel, see
1
Press [ ] (
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
(Online) indicator is off).
2
Select [Ethernet Driver] using [
] ( : Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
"Control Panel."
: Settings), select [Network] using [
] and [
] or [
Reset)."
] and [
(Online) indicator is on) or offline (the
], and then press [OK].
] on the control panel.
], and then press [OK].