Canon LBP6780x Manual page 285

[Grayscale
Conversion]
7
Specify the settings for [Print Settings] as the following, as needed.
[Copies]
[Paper Size]
[Paper Type]
[Image Orientation]
[Print Position]
[Zoom]
[Enlarge Print Area]
[Print 2-Sided]
[Binding Location]
Select the method for converting color print data to grayscale for printing.
This setting is for converting color data to B&W data.
[sRGB]: It calculates the grayscale value using the sRGB standard color conversion
method.
[NTSC]: It calculates the grayscale value using the NTSC standard color conversion
method.
[Uniform It takes the average value of the Red, Green and Blue color values as the
RGB]: grayscale value.
Specify the number of copies to be printed.
Specify the size of paper to print.
Specify the type of paper to print.
Select the orientation of the images from [Auto], [Vertical] or [Horizontal].
Set the location of the images from [Auto], [Center] or [Top Left]. When [Auto] is selected, if the
print location is specified in the TIFF format data, it will print at the specified location. If the
print location is not set, it will print centered. Since print location is not specified in JPEG
format, if [Auto] is selected, it will print centered.
Specify whether to enlarge or reduce the printing. When it is set to [Auto], it automatically
scales them to match with the effective print area of the paper and prints.
Specify whether to expand the printable area and print.
Depending on the document to be printed, part of the edges of the paper may not be
printed.
When it is set, it will print 2-sided.
Set the binding position on the long side of the paper (long-edged binding) or the short side of
the paper (short-edged binding).
If binding is set from the printer side, the position of the "gutter" is automatically adjusted on the
front and back sides of the paper.