Canon LBP6780x Manual page 580

[Recovery Printing] [Off], [On]
[Check Paper Size] [Off], [On]
[Substitute Size] [Off], [On]
[Off], [Mode
[Special Print Mode 1], [Mode 2],
A] [Mode 3],
[Mode 4]
*
[SD Card Maintenance]
-
[Format]
[Special Print Mode]
[Multi-Purpose
Tray]: [Off],
[On]
[Drawer 1]:
[Off], [On]
[Curl Correction]
[Drawer 2]
[Off], [On]
[Drawer 3]
[Off], [On]
[Plain L Speed
[Off], [On]
Prior.]
[Special Print Adj.
[Off], [On]
C]
(2-Sided)]:
-5.0 to
0.0 to
+5.0 (mm)
Specifies whether to print the partially printed page when the printer stops
printing due to a paper jam or an error occurring.
Specifies whether the printer should stop printing, displaying the message
<Check paper size.> or continue printing when [MP Tray Paper Size],
[Drawer 1 Size], [Drawer 2 Size], [Drawer 3 Size] is set to [Mixed Sizes].
When the paper of the target size is not loaded in the printer, the printer
prints on paper of the following sizes.
Size of the Paper to Be Printed
Depending on the paper type or the operating environment, vertical streaks
may appear on the printed paper. In this case, change the setting for this
option. Improving effectiveness for vertical streaks increases in the following
order.
[Off] (Effectiveness: low)
[Mode 1]
[Mode 2]
[Mode 3]
[Mode 4] (Effectiveness: high)
Even if you do not change the setting due to change in paper type or
operating environment, this may also avoid vertical streaks appearing on the
printed paper. As improving effectiveness increases, print density decreases.
This may also make outlines appear to be blurred or slightly jagged.
Delete the contents of the SD card.
When printed paper curls, set this item to [On].
When setting this item to [On], make sure to set the output slot to
* the output tray.
:
*
:
Specifies whether to reduce the waiting time until start of printing when the
paper type is set to [Plain L].
Depending on the paper type or the operating environment, vertical streaks
may appear on the printed paper. In this case, selecting [On] may solve the
problem.
If the printer produces sound during printing, selecting [On] may also reduce
the noise.
Letter
A4
Printer Driver Setting
A4
Letter