Connecting The Power Cord; Turning The Power On And Specifying The Initial Settings - Canon imageCLASS MF8350Cdn Starter Manual

1 2
Preface Installing the Machine

Connecting the Power Cord

Make sure that the
machine is off.
Do not connect the USB cable. Connect the USB cable when installing the software.
Turning the Power ON and Specifying the
Initial Settings
1.
Turn ON the power of
the machine.
2.
Specify the initial settings.
Select with [ ] or [
and then press [OK].
Language
English
French
Spanish
Portuguese
3
Configuring and Connecting the Fax
Plug the power plug into the
power socket.
], Select with [ ] or [
and then press [OK].
Select Country/Region
Australia (AU)
New Zealand (NZ)
Other
4
Connecting to a Computer and
Installing the Drivers
Press the power switch.
], Check and press [OK].
Check that tabs/tape
are removed from
toner cartridge.
Next
Appendix
Plug the power
plug into the AC
power outlet.
Check and press [OK].
Check that paper is
loaded in Drawer 1.
Next
3