Canon LBP6780x Manual page 320

EM E-Mail access
error.
The error codes that are displayed in the e-mail receive log list
If multiple errors have occurred, only the error of the highest priority is displayed (high: 407 > low: 499).
Error Code
407
408
412
420
421
422
423
424
430
431
UIDL Error
the UIDL command.
The printer could not connect to the
POP3 server because an error had
occurred in its hard disk.
Cause
The connection to the POP server was
disconnected.
Could not receive data of 1 Kbyte
(1024 byte) for 10 minutes while
receiving e-mails.
The response <ERR> was returned
from the POP server.
Could not receive data of 1 Kbyte
(1024 byte) for 10 minutes while
receiving e-mails.
The size of the e-mail data exceeded
1.5 GB.
The size of the e-mail text exceeded
25 MB.
The size of the attached files
exceeded 100 MB.
An attached file in an unsupported
format was sent.
The number of the attached files
exceeded 3.
An e-mail in which [From] is blank was
sent.
Received a divided mail.
An e-mail which included unsupported
encoding or character encoding was
sent.
Received a mail of an unsupported
type (message type).
Clear the hard disk error on the POP3
server.
*
Remedy
Consult your network administrator.
If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
Consult your network administrator.
Consult your network administrator.
If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
Reduce the size of the e-mail data to 1.5 GB or
less.
Reduce the amount of the e-mail text.
Reduce the size of the attached files to 100 MB or
less.
Change the format of the attached file into TIFF or
JPEG.
Reduce the number of the attached files to 3 or less.
Enter a name in [From].
Apply the following remedies to send the e-mail so
that it is not divided.
Reducing the size of the e-mail to be sent
(Reducing it to the size which cannot be
divided).
Specifying the application settings so that the
e-mail is sent without being divided.
Change the encoding or character encoding into that
supported by this printer.
"Receiving E-mail Data on the Mail Server and
Printing (E-mail Print)"
Change the content type into any one of the
following types that are supported by this printer.
text/plain
image/jpeg
image/tiff
image/tiff-fx
application/octet-stream
Change the content type of the multipart mail into
any one of the following types that are supported by
this printer.