Specifying The Device Name Or Administrator Information - Canon LBP6780x Manual

0978-0CC

Specifying the Device Name or Administrator Information

This section describes the procedure for specifying the settings using the Remote UI.
In the Remote UI, you can specify the settings by accessing the printer from a Web browser via a network.
NOTE
When specifying the settings using software other than the Remote UI
You can also specify the settings using the following software.
"FTP Client"
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
"NetSpot Device Installer"
You can specify the settings using the Canon software, NetSpot Device Installer, in the supplied CD-ROM.
1
Start the Remote UI, and then log in as Administrator.
"Starting the Remote UI"
2
Select [Security] under [Management Settings] in the [Settings/Registration] menu.
3
Click [Management Settings].