Uninstall / Install Pipeline With Axle - Kärcher HDS 7/12 M Service Manual

7.1.3

Uninstall / install pipeline with axle

 7.1.2Renew O-rings axle, hose reel
1 Rear bearing block
2 Screws
3 O rings
4 Pipeline with axle
Note
Align the pipeline with axle at a right angle to the rear bear-
ing block.
1 Pipeline with axle
2 Screw connection
3 Wrench
 Disconnect screw connection.
 Remove pipeline with axle.
72
English 5.906-432.0 Rev. 00 (06/15)