Kärcher HDS 7/12 M Service Manual page 71

1 Casing shell, hose reel
2 Bearing block
3 Crank
 Remove the front part of the hose reel.
1 Hose drum
2 Safety ring
3 Pipeline with axle
4 Node piece
5 Pliers
 Remove the retaining ring.
 Remove the knot.
 Remove the rear part of the hose reel.
1 Rear bearing block
2 Screws
3 O rings
4 Pipeline with axle
 Remove O-rings.
Installation information
Replace the O-rings.
Grease the O-rings.
Grease 6.288-088.0
Note
Check axle and connection piece for signs of wear.
71
English 5.906-432.0 Rev. 00 (06/15)