Rfid Query - Kärcher HDS 7/12 M Service Manual

7.27 RFID query

Display
45°C
+
„SET"
7.28 Brightness value of the flame sensor
Display
45°C
7.29 Testing the temperature sensor
Display
50°C
Explanation
Device is equipped with RFID.
Device is not equipped with RFID.
Check the setting when replacing the printed circuit
board.
Explanation
Test flame sensor. Display brightness value.
Explanation
Test temperature sensor Indication temperature.
Remark
Menu access:
Select 45°C
Switch off device. Hold SET.
Turn on the machine. Re-
lease SET. Select settings
with SET.
Menu access:
Select 45°C
Switch off device. Hold SET.
Turn on the machine. Re-
lease SET. Select settings
with SET.
Remark
<471: bright
>=471: dark
Remark
0°C is displayed when the
temperature is below 0°C.
English 5.906-432.0 Rev. 00 (06/15)
101