Checking The Brake Discs - KTM 1290 Super Adventure Owner's Manual

14 BRAKE SYSTEM
14.2

Checking the brake discs

Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
during hard braking in curves. This prevents the motorcycle from righting itself from an
inclined angle and moving along a larger curve radius. Due to the additional electronic con-
trol of the brake force distribution between the two wheels, the braking force is optimally
distributed and the motorcycle is additionally stabilized.
Info
The MSC is only active in ABS mode "Road".
–
Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
Info
Wear will reduce the thickness of the brake disc at the contact surface
the brake linings.
Brake discs - wear limit
Front
400618-10
Rear
» If the brake disc thickness is less than the specified value.
–
Change the brake disc.
–
Check the front and rear brake discs for damage, cracking, and deformation.

.
4 mm (0.16 in)
4.5 mm (0.177 in)
151
 of