Seat ALTEA Owner's Manual page 58

56 Cockpit
Priority 2 warning messages and information texts: "Information and warn-
ing messages on the screen" will automatically disappear from the screen
after a time and will be stored in the Vehicle status menu.
The warning and information texts may be viewed in this menu. If there is
no warning or information message, the option Vehicle status is not dis-
played. If there are several messages, each one is shown for a few seconds.
Example of menu use ⇒ p age 51.
Note
If there are no warning messages, this menu is not available.
Configuration menu
Open Configuration menu
– Select the option Configuration from the main menu: "Main
menu" and press button
wiper lever. or
– Press button or
 
⇒ F ig. 42
until the Configuration menu is displayed.
Example of menu use ⇒ p age 51.
Displayed on the
screen
Multifunction display This menu is used to establish the data in the mul-
data. tifunction display menu to be displayed on the in-
strument panel ⇒ p age 53
Convenience The convenience set-up mode is used to make the
settings for the convenience functions in the vehi-
cle.
⇒ F ig. 41
on the windscreen
OK A
on the multifunction steering wheel*
Function
Lights and visibility From this menu it is it possible to alter the vehicle
lighting settings.
Time The hours and minutes of the clock and the naviga-
tion system can be changed. Choose between 12
and 24-hour format and change to summer time.
Winter tyres The menu allows the setting of a speed at which an
optical and acoustic warning will be given by the
system. You can use this function, for example, if
you have fitted winter tyres which are not suited for
the top speed of your vehicle. Please see the sec-
tion "Wheels and tyres".

Language The display texts and the navigation system texts
can be seen in different languages.
Units This option allows you to select the units for dis-
playing temperature, fuel consumption values and
distances.
sel. speed The instrument panel also displays the speed in
another different unit of measurement (mph or km/
h) to that given on the speedometer.
Inter Service Service Consult service messages and reset service interval
display here.
Factory settings The manufacturer's predefined values for the func-
tions of this menu are restored.
a)
Back This returns to the main menu.
a)
Only if the windscreen wiper lever is used (MFI).
Note
● For electronic and vehicle equipment one or more of these menus will be
displayed.
● SEAT dealerships are able to programme other functions or change the
existing functions depending upon the vehicle equipment.
● The Configuration menu is only accessible when the vehicle is at a
standstill.
