Seat ALTEA Owner's Manual page 134

132 Seats and storage
To remove the rear shelf
– Press the side pin in the direction of the arrow, lift the cover and
⇒ F ig.
remove it 120.
– Installation is done in the reverse order.
WARNING
Do not place heavy or hard objects on the rear shelf, because they will
endanger the vehicle occupants in case of sudden braking.
CAUTION
● Before closing the rear lid, ensure that the rear shelf is correctly fitted.
● An overloaded luggage compartment could mean that the rear shelf is
not correctly seated and it may be bent or damaged.
● If the luggage compartment is overloaded, remove the tray.
Note
● Ensure that, when placing items of clothing on the luggage compart-
ment cover, rear visibility is not reduced.
Applies to the model: ALTEA XL / ALTEA FREETRACK
Load partition net*

The net partition prevents loose objects in the luggage compart-
ment from being thrown forward into the passenger compartment
(e.g. under sudden braking).
– Pull the net from underneath between the backrest and the fold-
ing tray and fit it to the slots in the roof, first the right then the
⇒ F ig.
left 121.
Fig. 121 Partition net
Fig. 122 Fastening rings
to tighten partition net.
