Seat ALTEA Owner's Manual page 248

246 If and when
Applies to the model: ALTEA
Side lights/ brake lights
– Open the rear lid.
⇒ F ig. 190
– Remove the bolts
– Remove the cover of the luggage compartment lateral panel.
– Unscrew the plastic fitting
Inserting a screwdriver under the plastic fitting may help to
loosen it.
Fig. 190 Side lights and
brake lights
Fig. 191 Side lights and
brake lights
.
A
⇒ F ig. 191
securing the tail light.
B
– Partially remove the tail light from its casing taking care not to
pull on the cable.
– Remove the bulb holder connector.
⇒ F ig. 192
– Unscrew the bolts
on this.
– Press on the bulb and rotate to the left then fit the replacement.
– To refit follow the steps in reverse order, taking special care
when fitting the bulb holder. The metal contacts of the bulb
holder ends should be correctly fitted with respect to the tail
light contacts.
from the bulb holder and pull
C
