Seat ALTEA Owner's Manual page 234

232 If and when
Wheel trims
The wheel trims must be removed to gain access to the wheel
bolts.
Removing
– Insert the extraction hook from the tools into the designated
ring, located in one of the bolt hole covers of the wheel cover
⇒ F ig.
171.
– Pull off the hub cap.
Wheel covers*
Fig. 171 Changing a
wheel: removing a hub
The wheel covers must be removed for access to the wheel bolts.
cap
Removing
– Remove the wheel cover using the wire hook
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Then
press the wheel cover onto the steel rim so that it engages all

round.
Fig. 172 Changing a
wheel: remove the wheel
cover.
⇒ F ig.
172.
