Instrument Panel Menus - Seat ALTEA Owner's Manual

Instrument panel menus*

Example of menu use
The setting of a speed warning will be used as an example of how
to use the menus. This is a good idea if you are, for example, using
winter tyres which are not suited for the top speed of the vehicle.
1. Open the main menu with the MFI lever
– Switch the ignition on.
Safety
Fig. 41 Windscreen wip-
er lever: control buttons.
Fig. 42 Controls on the
steering wheel: control
buttons.
Operation
– Hold down button for two seconds to return to main menu
B
from other menu. It may be necessary to repeat this operation
until the main menu is displayed.
2. Open the menu "Configuration" with the MFI lever
– To choose an option from the menu, press the upper or lower
end of the rocker switch. The selected option is displayed be-
tween two lines and there will also be a triangle on the right.
– Select menu Configuration.
on the windscreen wiper lever. The Configura-
– Press button
A
tion menu is opened.
2. Access the "Configuration" menu with the steering wheel
controls
– To access the "Configuration" menu, press button
until the menu is displayed. Now you are in this menu.
3. Open the main menu "Winter tyres"
– Select option Winter tyres using switch
– Press the button . The menu Winter tyres is opened.
A
4. Program a speed limit warning
– Use button to select the option +10 km/h or -10 km/h and
B
press button to either increase or decrease the speed dis-
B
played.
5. To activate and deactivate the speed limit warning
– Use switch to select the menu point On / Off and press the
B
button to switch the speed warning on or off. If the speed warn-
ing is deactivated, three dashes will be displayed ---.
Advice
Cockpit
⇒ F ig. 42
C
.
B

Technical specifications
51