Towing And Tow-Starting - Seat ALTEA Owner's Manual

254 If and when
Note
The vehicles must not touch each other, otherwise electricity could flow as
soon as the positive terminals are connected.

Towing and tow-starting

Tow-starting
We recommend that you do not tow-start your vehicle. Jump-start-
ing is preferable ⇒ p age 252.
However, if your vehicle has to be tow-started:
nd rd
– Engage 2 or 3 gear.
– Keep the clutch pressed down.
– Switch the ignition on.
– Once both vehicles are moving, release the clutch.
– As soon as the engine starts, press the clutch and move the
gear lever into neutral. This helps to prevent driving into the
towing vehicle.
WARNING
The risk of accidents is high when tow-starting. The vehicle being towed
can easily collide with the towing vehicle.
CAUTION
When tow-starting, fuel could enter the catalytic converter and damage it.

General notes
Please observe the following points if you use a tow rope:
Notes for the driver of the towing vehicle
– Drive slowly at first until the tow rope is taut. Then accelerate
gradually.
– Begin and change gears cautiously. If you are driving an auto-
matic vehicle, accelerate gently.
– Remember that the brake servo and power steering are not
working in the vehicle you are towing. Brake sooner than nor-
mal and pressing the pedal gently.
Notes for the driver of the towed vehicle
– Ensure that the tow rope remains taut at all times when towing.
Tow rope or tow bar
It is easier and safer to tow a vehicle with a tow bar. You should only use a
tow-rope if you do not have a tow-bar.
A tow rope should be slightly elastic to reduce the loading on both vehicles.
It is advisable to use a tow rope made of synthetic fibre or similarly elastic
material.
Attach the tow rope or the tow bar only to the towline anchorages provided
or a towing bracket.

