Seat ALTEA Owner's Manual page 251

– Remove the blown bulb and replace it with another.
– To refit follow the steps in reverse order, taking special care
when fitting the bulb holder.
Fog light and reverse light
– Open the rear lid.
– Pull the cover off.
– Turn the bulb holder to the left.
– Remove the blown bulb and replace it with another.
– Installation involves all of the above steps in reverse sequence.
Side turn signals
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
Safety
B
Fig. 199 Side turn signal
Operation
– Remove the failed glass bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First place the turn signal in the opening in the bodywork, fixing
⇒ F ig.
the tabs 199, arrow
– Insert the bulb as shown by the arrow

Advice
If and when
.
1
⇒ F ig.
199.
2
Technical specifications
249
