Brake Fluid - Seat ALTEA Owner's Manual

216 Checking and refilling levels
Applies to the model: ALTEA XL / ALTEA FREETRACK
Changing the rear wiper blade
Perfect rear wiper blade condition is essential for clear rear vision.
Damaged wiper blades should be replaced immediately.
Removing the wiper blade
– Lift the rear wiper arm.
– Release the blade
.
2
Fitting the wiper blade
– Insert the wiper blade onto the windscreen wiper arm until it
clicks into place.
Check the condition of the wiper blade regularly. Change as required.
If the windscreen wiper scrapes, it should be replaced if damaged, or
cleaned if soiled.
If this is not sufficient, refer to a specialised workshop.
Fig. 166 Changing the
rear window wiper blade.
by pulling it in the direction of the arrow
1
WARNING
Do not drive unless you have good visibility through all windows!
● Clean the windscreen wiper blades and all windows regularly.
● The wiper blades should be changed once or twice a year.
CAUTION
● A damaged or dirty window wiper could scratch the rear window.
● Never use fuel, nail varnish remover, paint thinner or similar products to
clean the window.
● Never move the windscreen wiper by hand. This could cause damage.

Brake fluid

Checking the brake fluid level
– Read off the fluid level at the transparent brake fluid reservoir. It
should always be between the "MIN" and "MAX" marks.

Fig. 167 Engine com-
partment: brake fluid res-
ervoir lid.
