Seat ALTEA Owner's Manual page 111

Automatic anti-dazzle interior rear vision mirror*
Switching off the anti-dazzle function
⇒ F ig.
– Press button
A
Switching on the anti-dazzle function
⇒ F ig.
– Press button
A
Anti-dazzle function
The anti-dazzle function is activated every time the ignition is switched on.
The green warning lamp lights up in the rear vision mirror housing.
When the anti-dazzle function is enabled, the interior rear vision mirror will
darken automatically according to the amount of light it receives. The anti-
dazzle function is cancelled if reverse gear is engaged.
Safety
Fig. 83 Automatic anti-
dazzle interior rear vision
mirror.
83. Control lamp goes off.
B
83. The control lamp lights up.
Operation
Note
● The automatic anti-dazzle function will only work properly if the sun
blind* for the rear window is retracted and there are no other objects pre-
venting light from reaching the interior rear vision mirror.
● If you have to stick any type of sticker on the windscreen, do not do so in
front of the sensors. Doing so could prevent the anti-dazzle function from
working well or even from working at all.
Exterior mirrors
The exterior mirrors can be adjusted using the rotary knob in the
centre console.
Basic setting of exterior mirrors
⇒ F ig. 84
1. Turn knob to position L (left exterior mirror).
2. Turn the rotary knob to position the exterior mirror so that you
have a good view to the rear of the vehicle.
3. Turn the knob to position R (right exterior mirror).
Advice
Lights and visibility

Fig. 84 Exterior mirror
control.

Technical specifications
109