Storage Compartment - Seat ALTEA Owner's Manual

Folding and lifting the seat backrests
Folding the backrest forwards
– Pull the loop on the side of the seat
In this position the backrest is locked.
Converting the table to a seat
– Pull the loop on the side of the seat
tion of the arrow and lift the seat backrest into position.
Safety
Fig. 92 Folding the rear
seat backrests down
Fig. 93 Lifting the seat
backrests
⇒ F ig. 92
.
1
⇒ F ig. 93
in the direc-
2
Operation
When folding or lifting backrests, make sure to place the side seat belts in
⇒ F ig. 92
the trim clip to prevent them from being damaged by becoming
trapped in the backrest lock.
WARNING
● You should check that the backrest has engaged properly in position
after the loop is released.
● For safety reasons the locking system loops on the seats may not be
used to secure any items.
● After locking the seat backrest into position ensure that the seat
belts protrude from the seat.

Storage compartment

Storage compartment on the front passenger side
The compartment can be opened by pulling the lever
Advice
Seats and storage

Fig. 94 Passenger side:
storage compartment
⇒ F ig.
94.

Technical specifications
117