Table of Contents
Advertisement
4 Viewing Video on the Webpage
1. Once the device's IP address has been identified, type the IP into the Microsoft® Internet Explorer web
browser URL bar and enter the address of the device.
During initial access, the ActiveX controls installation window may pop up.
Steps:
1.
When the browser asks to install the AxUMF software, click the Install button to proceed.
2.
When the Setup installation pop-up window appears, click the Install button to preceed with the rest
of the installation.
NOTE:
The figures during the installation process may differ depending on the system OS and the IE version.
5 Setup Page
To setup the device configuration:
Steps:
1.
Click the Setup button on the upper left corner of the web page.
2.
Enter the user name and the password when the login page is displayed. Then, click the OK button
(The default username and password are admin and 12345).
To learn how to set up the camera on the web page for the advanced configuration, refer to the device's user
manual.
6 Safe Mode
Your device will get restarted in safe mode if the device does not completely boot certain times. The main causes
for safe mode are as follows.
The power supply is continually unplugged certain times in the middle of system booting.
The firmware files required for system booting are damaged.
There are conflicts in the system settings.
You will see the page to indicate that your device is in safe mode and to guide you what to do in steps. Follow
the instructions on the webpage according to each step.
NOTE:
One of the methods to update firmware is using IP Admin Tool. Please refer to Section 3.2 Error!
Reference source not found. for the detailed procedure.
NOTE:
If your device is still in safe mode after trying to update firmware, please contact your local agency to get
.
further assistance
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX Time of Flight Quick Start Guide | VX-VTOF-01
8
Advertisement
Table of Contents
