MAINTENANCE WORK ON CHASSIS AND ENGINE
Filling up with engine oil
9.108
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Topping up engine oil
9.109
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Checking gear oil level
9.110
Info
The gear oil level must be checked when the engine is cold.
x
–
Remove the screw cap
Engine oil
–
Mount and tighten screw cap
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
200115-10
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. (
–
Remove the screw cap
Engine oil (SAE 10W/50) (
–
Mount and tighten screw cap
Danger
Danger of poisoning Exhaust gases are poisonous and can result in uncon-
sciousness and/or death.
–
200115-10
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. (
–
Stand the motorcycle upright on a horizontal surface.
Condition
Engine is cold.
–
Remove gear oil level check screw
–
Check the gear oil level.
A small amount of gear oil should flow out.
»
If no gear oil flows out:
–
–
Mount and tighten the gear oil level check screw.
200116-10
Guideline
Screw, gear oil level check
on the generator cover and fill up with engine oil.
0.60 l (0.63 qt.)
.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in a closed space.
p. 75)
on the generator cover and fill up with engine oil.
p. 97)
.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in a closed space.
p. 75)
Add gear oil.
(
p. 79)
x
Engine oil (SAE 10W/50) (
. Stand the vehicle upright.
M6
8 Nm (5.9 lbf ft)
77
p. 97)