CONTROLS
Querying the lap time
5.17
Info
This function can be called only if lap times are measured.
SPEED display mode (speed)
5.18
SPEED/H display mode (service hours)
5.19
–
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
Condition
The motorcycle is standing.
–
Press the button
the display.
–
Press the button
LAP 1 appears on the left side of the display.
–
Laps 1-10 can be displayed by pressing the button
–
The
button has no function
–
Press the button
Next display mode
400321-01
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the SPEED mode.
–
Press the button
the display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
400317-02
Condition
•
Vehicle at a standstill
–
Press the button
display.
The number of service hours of the engine is shown in the H display mode.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that maintenance work is car-
400316-01
ried out at the right intervals.
If the speedometer is in the H display mode at the start of the trip, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during travel.
Press the button
Press the button
Press the button
for 3 - 5 seconds.
for 3 - 5 seconds.
briefly and repeatedly until LAP appears at the bottom right of
briefly.
briefly.
briefly and repeatedly until SPEED appears on the left side of
briefly and repeatedly until H appears at the bottom right of the
. No function
. No function
The display changes to the Setup menu of the speedometer
functions.
18
.