Filling The Cooling System - KTM 690 SMC Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE
Filling the cooling system
9.73
Warning
Danger of poisoning Coolants are poisonous and a health hazard.
–
Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and con-
tact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
–
Stand the vehicle upright.
–
Place a suitable container under the engine.
–
Remove screw
–
Completely drain the coolant.
–
Fit screw
Guideline
Plug, drain hole of water pump
600616-10
x
–
Stand the motorcycle on its side stand on a horizontal surface.
–
Remove radiator cap
600618-10
. Remove the radiator cap.

with a new seal and tighten it.

.

M10x1 15 Nm (11.1 lbf ft)
135