GENERAL TIPS ON PUTTING INTO OPERATION
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
–
Make sure that the pre-delivery inspection work has been carried out by an authorized KTM workshop.
You receive a delivery certificate and the service record at vehicle handover.
–
Before your first trip, read the entire operating instructions carefully.
–
Get to know the operating elements.
–
adjust the basic position of clutch lever. (
–
adjust the basic position of handbrake lever. (
–
Adjust the basic position of the foot brake pedal.
–
Get used to handling the vehicle on a car park before making a longer trip. Try also to ride as slowly as possible and in a standing posi-
tion to get a better feeling for the vehicle.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Do not make any changes to the vehicle, and use only KTM approved parts.
Info
Parts from other manufacturers can reduce the operational safety of the vehicle.
–
Run the engine in.
Running in the engine
6.2
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first: 1,000 km (621.4 mi)
After the first: 1,000 km (621.4 mi)
S. 137)
S. 84)
x
(
S. 93)
6,000 rpm
7,800 rpm
45