Wheel Bearings Inspection - Triumph T120 Owner's Manual

Maintenance
Note:
• Always inspect the wheel bearings
at the same time as the steering
bearings.
Inspecting the Steering for Free Play
Position the motorcycle on level ground,
in an upright position.
Raise the front wheel above the ground
and support the motorcycle.
Standing at the front of the motorcycle,
hold the lower end of the front forks
and try to move them forward and
backward.
If any free play can be detected in the
steering (headstock) bearings, ask your
authorized Triumph dealer to inspect
and rectify any faults before riding.
Warning
Riding the motorcycle with incorrectly
adjusted or
(headstock) bearings is dangerous and
may cause loss of motorcycle control
and an accident.
Remove the support and place the
motorcycle on the side stand.
98
defective steering

Wheel Bearings Inspection

If the wheel bearings in the front or rear
wheel allow play in the wheel hub, are
noisy, or if the wheel does not turn
smoothly, have your authorized Triumph
dealer inspect the wheel bearings.
The wheel bearings must be inspected
at the intervals
scheduled maintenance chart.
Inspecting the Wheel Bearings
Position the motorcycle on level ground,
in an upright position.
Raise the front wheel off the ground
and support the motorcycle.
Standing at the side of the motorcycle,
gently rock the top of the front wheel
from side to side.
If any free play can be detected, ask
your authorized Triumph dealer to
inspect and rectify any faults before
riding.
Reposition the lifting device and repeat
the procedure for the rear wheel.
Remove the support and place the
motorcycle on the side stand.
specified in the