Steering/Wheel Bearings; Steering Inspection - Triumph T120 Owner's Manual

The bar end mirrors will be set by your
dealer and will not normally require any
adjustment. Should
necessary, do not rotate the mirror
beyond 75°, measured from the vertical
section of the mirror arm.
1. Mirror arm vertical section
adjustment be
1
75°

Steering/Wheel Bearings

Warning
To prevent risk of injury from the
motorcycle falling
inspection, make
motorcycle is stabilized and secured on
a suitable support.
Do not exert extreme force against
each wheel or
vigorously as this may cause the
motorcycle to become unstable and
cause injury by falling from its support.
Make sure that the position of the
support block will not cause damage to
the motorcycle.

Steering Inspection

Lubricate and inspect the condition of
the steering (headstock) bearings in
accordance
maintenance requirements.
Maintenance
during the
sure that the
rock each wheel
with scheduled
97