Warning Lights; Engine Management System Malfunction Indicator Light (Mil); Low Oil Pressure Warning Light - Triumph T120 Owner's Manual

Warning Lights

Engine Management System
Malfunction Indicator Light (MIL)
The Malfunction Indicator Light
(MIL) for the
system illuminates when the ignition is
switched ON (to indicate that it is
working) but should
illuminated when the engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems controlled
management system.
circumstances, the engine management
system will switch to 'limp-home' mode
so that the journey may be completed, if
the fault is not so severe that the
engine will not run.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust emissions
consumption.
performance could cause a dangerous
riding condition, leading to loss of
control and an accident. Contact an
authorized Triumph dealer as soon as
possible to have the fault checked and
rectified.
engine management
not become
by the engine
In such
and
Reduced engine
General information
Note:
• If the MIL flashes when the ignition
is switched
authorized Triumph dealer as soon
as possible to have the situation
rectified. In these circumstances
the engine will not start.

Low Oil Pressure Warning Light

With the engine running, if the
engine
dangerously low, the low oil pressure
warning light will illuminate.
Stop the engine immediately if the low
oil pressure warning light illuminates.
Do not restart the engine until the
fault has been rectified.
Severe engine damage will result from
running the engine when the low oil
pressure warning light is illuminated.
Note:
• The low oil pressure warning light
will illuminate if the ignition is
fuel
switched ON without running the
engine.
ON contact
oil pressure
Caution
an
becomes
27