Headlight Adjustment - Triumph T120 Owner's Manual

Maintenance
Caution
Covering the headlight lens during
operation with
luggage, adhesive
intended to alter
headlight beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is not
considered a manufacturing defect
and will not
warranty.
If the headlight must be covered
during use - such as taping of the
headlight lens
closed‑course
headlight must be disconnected.
118
Continued
items of clothing,
tape, devices
or adjust
or non genuine
be covered under
required during
conditions -

Headlight Adjustment

Note:
• Always make sure the handlebars
are in the straight ahead position
when checking and adjusting the
the
headlight beam setting.
1
the
1. Headlight assembly mounting bolt
Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolts and
altering the position of the headlight
assembly.
Retighten
adjustment to 7 lb ft (10 Nm).
the fasteners after