Safety Instruction - 3xLogic VX-VTOF-01 User Manual

Precaution
Please read this manual carefully before installing the device.

Never disassemble the device. Unauthorized disassembly may cause equipment failure or damage to

the unit resulting in warranty failure.
The device is for indoors only. Thus, please do not install the device in a place exposed to direct

sunlight.
Do not operate the camera in environments beyond the specified temperature.

Refer to Environment Condition on APPENDIX (A): SPECIFICATIONS in this manual.

Before applying power to the camera, check the power source to ensure that it is within the

specifications. Refer to Electrical Characteristics on APPENDIX (A): SPECIFICATIONS.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss.
This device complies with International Standard IEC/EN 60825-1:2014 for Class 1 laser products. To

ensure safe use of the product, do not directly look into the laser emitters and do not disassemble
the product. Failure to follow these instructions and warnings may result in injury or damage to the
product.
CAUTION: Use of controls or adjustments or performances of procedures other than those specified
herein may result in hazardous radiant exposure.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
User Manual | VISIX Time of Flight People Tracking Camera
3