Color Temperature - Christie DS+5K User Manual

Section 6: Specifications
Lenses
0.73:1 Fixed
1.2:1 Fixed (short)
1.2:1 Fixed (long)
1.45 – 1.8:1 Zoom
1.8 – 2.5: Zoom
2.5 – 4.5:1 Zoom
4.5 – 7.3:1 Zoom
.67:1 Fixed HD
1.1:1 SXGA+ FP
1.1:1 SXGA+ RP
1.4-1.8:1 Zoom HD
1.8-2.6:1 Zoom HD
2.6-4.1:1 Zoom HD
4.1-6.9:1 Zoom HD
Inputs
6-2
Downloaded from ProjectorsManual.com Manuals
Colors and Gray Scale
Resolution
Displayable colors

Color Temperature

Default
HD Default
Range of Adjustment (see Note 1)
NOTE 1: Via electronic controls, with Comprehensive Color Adjustment
Lenses Offsets (Movement)
or
N/A
N/A
100%
100%
100%
100%
100%
50%
100%
100%
100%
100%
100%
100%
NOTES: 1) 0% offset is equal to half the image above and below lens center OR half the image to the left
or right of lens center. 2) Offsets are subject to a
Standard Analog RGB or YPbPr
Horizontal Frequency Range
Vertical Frequency Range (See Note 2)
Scan format
Pixel Clock Rate (max.)
Signal Format
Input Levels
Nominal Impedance
NOTE 2: Value specifies frame rate of non-interlaced sources and field rate for
interlaced sources. Frame/field rates higher than the maximum refresh rate of the
panels will be displayed at a lower rate (i.e., frames will be dropped).
Max. Amount of Display Above or
Below Lens Center
or
N/A N/A
N/A N/A
50% 1050 pixels or
50% 1050 pixels or
50% 1050 pixels or
50% 1050 pixels or
50% 1050 pixels or
20% 810 pixels or
50% 1080 pixels or
50% 1080 pixels or
50% 1080 pixels or
50% 1080 pixels or
50% 1080 pixels or
50% 1080 pixels or
±
7% centering tolerance.
(Interlaced or Progressive Scan Format)
R, G, B, - with sync:
R, G, B, - without sync:
Pb, Pr
10 bits
1.1billion
5800K +950K/-650K
6300K +/- 500K
3200K – 9300K
™
Max. Amount of Display Left or
Right of Lens Center
N/A N/A
N/A N/A
100% 1050 pixels or
100% 1050 pixels or
100% 1050 pixels or
100% 1050 pixels or
100% 1050 pixels or
75% 1152 pixels or
100% 1440 pixels or
100% 1440 pixels or
100% 1440 pixels or
100% 1440 pixels or
100% 1440 pixels or
100% 1440 pixels or
31 – 120 kHz
23.97 – 150 Hz
Interlaced or progressive
220 MHz max
Analog RGB, YPbPr, Composite (on
"G, PB" input and S-video (luma on
"R/Pr/Y" input and chroma on
"B/Pb/C" input)
±2 dB
1.0V
p-p
±2 dB
0.7V
p-p
±2 dB
0.7
p-p
75 ohms
turned off.
N/A
N/A
75%
75%
75%
75%
75%
60%
75%
75%
75%
75%
75%
75%
013-100199-04