Christie DS+5K User Manual page 45

Copying or
Deleting Channels
013-100199-04
Downloaded from ProjectorsManual.com Manuals
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press if you want to copy the selected channel or delete this or other
Func
channels. See Copying or Deleting a Channel below.
•
Press if you want to edit channel setups (i.e., non-image related parameters)
for the selected channel. See Editing a Channel Setup, below.
, highlight the desired channel in the Channel Setup menu, then
TO COPY A CHANNEL
press to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
—a new channel will be created. It is identical to original, which still remains,
but it is identified with the next available number from 01-50. If you change your
mind and do not want to copy the current channel, press
the previous menu. Copying channels is a quick method for creating numerous
channels, each of which can then be edited and adjusted for a variety of presentations
in the future. See Figure 3.4.
, highlight the desired channel in the Channel Setup menu,
TO DELETE A CHANNEL
then press to activate the Channel Copy/Delete submenu. Select "Delete" and
Func
press —a window will appear to confirm the deletion of this channel. See Figure
3.5.
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Video
Composite Video
Digital
To copy, delete or edit a channel,
Figure 3.4. Copying A Channel
Section 3: Operation
to cancel and return to
Exit
3-17.