Christie DS+5K User Manual page 40

Section 3: Operation
3-12
Downloaded from ProjectorsManual.com Manuals
Once selected, change the setting as desired (see below) and press
return to the current function menu.
Slide bars in menus – The current value for a given
parameter, such as size or vertical stretch, appears to the left
of its slide bar icon (adjustment window). This number often expresses a percentage,
or it may have units associated with it (such as pixels, degrees Kelvin, etc.),
depending on the specific option. Press
down—both the number and the length of the bar change accordingly. Hold for
continuous adjustment. Or press
number entry via the keypad and then press
"Direct" slide bars - For quick access, you can access Gamma, Brightness, and
Contrast slide bars without traveling the menu system. For example, simply press
to immediately display the same contrast slide bar accessed with the Contrast option
in the Image Settings menu.
Use the arrow keys to adjust a direct slide bar, or press
number from the keypad, then
you are done, press
Exit
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off
(see OSD or Menu Preferences menu) — the slide bar just won't be visible. 2) A
direct slide bar disappears if it is not used within five seconds.
Conditions are present if its adjacent
Checkboxes -
checkbox contains a checkmark. To toggle the checkbox,
simply highlight and press
uncheck. If a checkbox is numbered, simply enter its number to immediately toggle
the checkbox.
Pull-down lists – To see a pull-down list of options available for a given parameter
labeled with a , you can:
•
Highlight it and press
•
Enter the menu option number
Use the or keys to navigate up and down within the list (the current choice
is noted with a small ). Press
∋
Figure 3.3).
to gradually adjust the setting up or
to activate a slide bar text box for specific
to save (or press
or or
to save and return to your presentation.
, or highlight and use
(Enter)
to choose an option from the list, if desired (see
to save and
to cancel).
Exit
and enter a specific
to save (or to cancel). When
Exit
to check and to
013-100199-04
Cont