Device Buttons; Table 3-1 Description Of The Zxhn F660'S Interfaces; Table 3-2 Description Of The Zxhn F660'S Buttons - Zte ZXHN F660 Description

Table 3-1 Description of the ZXHN F660's Interfaces

Device Interface
PON(PON)
Phone
LAN
Power
USB
3.2

Device Buttons

The ZXHN F660's device Buttons as shown in Figure 3-1 and Figure 3-2 includes one
reset button, one power button, one Wi-Fi button and one WPS button.

Table 3-2 Description of the ZXHN F660's Buttons

Device Button
Reset
ON/OFF
ZTE Confidential & Proprietary
ZXHN F660 with External Antenna
SC/APC interface for fiber connection.
Fully compliant to ITU-T G.984.x GPON standards
Supports two Phone interfaces with RJ-11 connector
Supports four 10/100/1000 Base-T Ethernet
interfaces with RJ-45 connector
Supports half /Full Duplex and flow control, auto
negotiation or manual configuration
Supports MDI/MDIX auto-sensing
12V Power Input Interface
+12V DC (via external AC/DC adapter: 90–240V,
50/60Hz AC input, 12V DC output )
Support USB host interface, 2.0 standard
When the device is powered on, press the button for 1
second to restart the device. The user setting
information is not lost.
When the device is powered on, press the button for
more than 5 seconds to restore the device to the
factory default settings.
Power on/off
Press the button (ON), the device is turned on
Press the button again (OFF), the button pops, and
the device is turned off
ZXHN F660 Product Description
Description
Description
9