Canon iPF760 series Service Manual page 59

Setting Item
[System Setup] [Erase HDD Data] [High Speed]
[Output Method]
[Print After Recv]
[Save: Shared Box]
[Show Job Log]
[Prep.MovePrinter]
[Admin. Menu] [Change Password]
[Init.Admin.Pswd]
[Printer Info] [Paper Info]
[Ink Info]
[Head Info]
[System Info]
[Error Log]
[Other Counter]
Delete the file management information of the saved data in the HDD.
[Secure High Spd.] Overwrite the random data in the whole of the hard disk drive.
[Secure] Overwrite 00 and FF and random data in the whole of the hard disk drive once at a time.
Execute the verify check whether the data has written correctly to the hard disk drive.
[Print] Select the output method of jobs sent from software other than the printer driver. This can be
set from the printer if you are using a printer driver.
[Print (Auto Del)]
Select [Print] to print normally. Select [Print (AutoDel)] to print and delete the data in hard
[Save: Box XX]
disk. Select [Save: Box XX] to save to box without printing.
Setting of jobs sent from software other than the printer driver. This can be set from the printer
if you are using a printer driver. Select [On]to print after saving.
Select [Off] to print without saving to a common box.
Selecting off prevents display of the log in Job Menu > Job Log. Additionally, the log is not
printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected,
the Status Monitor accounting functions will not work correctly.
Select when moving the printer. Follow the instruction on the screen and perform the necessary
process.
This is not displayed when displaying a warning message about the amount remaining
maintenance cartridge.
Set a password to restrict displaying/setting of menus as follows. Allowed value is from 0 to
9999999.
- Allow only administrator to display/set
[IPv4]
[Change Password]
[Init.Admin.Pswd]
- Allow administrator to display/set and non-administrator to display only
[Interface Setup] (exclude [IPv4])
[Date & Time]
[Date Format]
[Time Zone]
[Use RemoteUI]
[Reset PaprSetngs]
[Save: Shared Box]
Press [OK] to return the [Administrator Menu] password to factory default.
Displays the currently set paper type, size and printer settings.
Displays ink levels and maintenance cartridge capacity.
Displays the Printhead information.
Displays the firmware version, serial number, and interface information.
Displays the most recent error messages (up to 5).
Displays the total area printed.
Description/Instructions
Chapter 1
1-45