Canon iPF760 series Service Manual page 322

Chapter 8
Display message
Ink insufficient.
Press OK and replace ink
tank.
Ink insufficient.
Press OK and replace ink tank.
Ink insufficient.
Press OK and replace ink tank.
Ink insufficient.
Press OK and replace ink tank.
Ink insufficient.
Press OK and replace ink tank.
Ink insufficient.
Press OK and replace ink tank.
Ink insufficient.
Press OK and replace ink tank.
No ink tank loaded.
Press OK and check ink tank.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
No ink tank loaded.
Press OK and check ink tank.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
No ink tank loaded.
Press OK and check ink tank.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
No ink tank loaded.
Press OK and check ink tank.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
No ink tank loaded.
Press OK and check ink tank.
No ink tank loaded.
Press OK and check ink tank.
No ink tank loaded.
Press OK and check ink tank.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
! Do not pull out ink tank.
(Change to the following message)
! Do not use removed ink tanks in other
printers.
Remaining level of the ink cannot be
correctly detected.
Check ink tank.
No ink tank loaded.
Press OK and check ink tank.
Remaining level of the ink cannot be
correctly detected.
Check ink tank.
No ink tank loaded.
Press OK and check ink tank.
Remaining level of the ink cannot be
correctly detected.
Check ink tank.
No ink tank loaded.
Press OK and check ink tank.
8-12
Code* Condition detected
03810209-259B Low on the B ink tank (during pre-printing
checks)
03810212-2584 Low on the PM ink tank (as during
cleaning)
03810212-2594 Low on the PM ink tank (during pre-
printing checks)
03810213-2585 Low on the PC ink tank (as during
cleaning)
03810213-2595 Low on the PC ink tank (during pre-
printing checks)
03810215-2589 Low on the PGY ink tank (as during
cleaning)
03810215-2599 Low on the PGY ink tank (during pre-
printing checks)
03830101-2521 Y ink tank not installed.
03830101-25AC Y ink tank detachment (when using the
refill ink tank)
03830102-2522 M ink tank not installed.
03830102-25AB M ink tank detachment (when using the
refill ink tank)
03830103-2523 C ink tank not installed.
03830103-25AA C ink tank detachment (when using the
refill ink tank)
03830104-2520 BK ink tank not installed.
03830104-25A9 BK ink tank detachment (when using the
refill ink tank)
03830105-2528 GY ink tank not installed.
03830106-2526 MBK ink tank not installed.
03830106-2527 MBK2 ink tank not installed.
03830106-25B0 MBK ink tank detachment (when using the
refill ink tank)
03830106-25B1 MBK2 ink tank detachment (when using
the refill ink tank)
03830107-251A Unidentified status of R ink tank (refill ink
tank detection)
03830107-252A R ink tank not installed.
03830108-251C Unidentified status of G ink tank (refill ink
tank detection)
03830108-252C G ink tank not installed
03830109-251B Unidentified status of B ink tank (refill ink
tank detection)
03830109-252B B ink tank not installed.
Action
Replace with a fully replenished B ink tank.
Replace with a fully replenished PM ink tank.
Replace with a fully replenished PM ink tank.
Replace with a fully replenished PC ink tank.
Replace with a fully replenished PC ink tank.
Replace with a fully replenished PGY ink tank.
Replace with a fully replenished PGY ink tank.
Install a Y ink tank.
Install the detached ink tank.
Install a M ink tank.
Install the detached ink tank.
Install a C ink tank.
Install the detached ink tank.
Install a BK ink tank.
Install the detached ink tank.
Install a GY ink tank.
Install a MBK ink tank.
Install a MBK ink tank.
Install the detached ink tank.
Install the detached ink tank.
Invalidate the ink remaining detection function or
replace the ink tank.
Install a R ink tank.
Invalidate the ink remaining detection function or
replace the ink tank.
Install a G ink tank.
Invalidate the ink remaining detection function or
replace the ink tank.
Install a B ink tank.