Canon iPF760 series Service Manual page 314

Chapter 8
Display message
Paper position not suitable for borderless
printing.
Mail box full.
Now printing without saving data.
Before borderless printing,
move the blue platen switch.
Blue platen switch is dirty.
Please clean the switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Before borderless printing,
move the blue platen switch.
Parts replacement time has passed.
Call for service.
End of paper feed.
Cannot feed paper more.
Prepare for parts replacement.
Call for service.
8-4
Code* Condition detected
01861001-1053 Borderless printing disabled (physical)
The occurrence conditions of borderless
printing not possible error (physical) have
been met with "Warning" set in [Detect
Mismatch] in the menu settings.
01861003-2902 100 jobs are stored in the Personal Box.
01861004-1049 The platen shutter is closed at the
borderless printing.
01861004-1050 Platen shutter cleaning warning
01861006-1055 Platen shutter No.1 open warning
01861007-1056 Platen shutter No.2 open warning
01861008-1057 Platen shutter No.3 open warning
01861009-1058 Platen shutter No.4 open warning
0186100A-1059 Platen shutter No.5 open warning
0186100B-105A Platen shutter No.6 open warning
0186100C-105B Platen shutter No.7 open warning
0186100D-105C Platen shutter No.8 open warning
0186100E-105D Platen shutter No.9 open warning
0186100F-105E Platen shutter No.10 open warning
01861010-105F Platen shutter No.11 open warning
01861011-1060 Platen shutter No.12 open warning
01861012-1061 Platen shutter No.13 open warning
01861013-1062 Platen shutter No.14 open warning
Parts counter W2 level
Forced feed limit
Parts counter W1 level
Action
The warning is cleared when the print job is completed
or cancelled.
Delete unneeded jobs stored in Personal Boxes.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Clean the platen shutter.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Open the corresponding platen shutter.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
After checking the parts counter in service mode,
replace any part whose counter is nearing the error
value.
Check the remaining quantity of roll media.
Check the parts counter in service mode.