Canon iPF760 series Service Manual page 150

A4- to a0-size
Hide thumbs Also See for iPF760 series:
Table of Contents

Advertisement

Chapter 3
7) Attach all of the external covers.
8) Attach the cushioning materials and tape.
9) If the printer is mounted on a stand, remove the printer from the stand.
10) Pack the printer into the packing box, and then put the roll media, ink tank and stand in another packing box for moving.
Use the original packing material for the printer and stand. If it is not available, pack them with a sufficient amount of cushioning materials.
3. Manual capping
When transporting the printer, cap the Printhead to protect the nozzles from drying out and to keep them clean. Follow the procedures described below:
1) While referring to "DISASSEMBLY/REASSEMBLY" > "Points to Note on Disassembly and Reassembly" > "Opening the Cap/Releasing the Carriage Lock
Pin/Moving the Wiper Unit manually", open all of the caps.
2) Move the carriage to the home position.
3) While referring to "DISASSEMBLY/REASSEMBLY" > "Points to Note on Disassembly and Reassembly" > "Opening the Cap/Releasing the Carriage Lock
Pin/Moving the Wiper Unit manually", perform the capping.
Manual capping is an emergency measure when the printer does not operate. Manual capping can damage the printhead.
3-2

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ipf750 series

Table of Contents