Controls Overview; Camera Control - Raymarine a65 Operation Instructions Manual

20.4 Controls overview

The thermal camera application is available on
compatible Raymarine multifunction displays and
systems. It includes controls for the thermal camera.
Rotary control Zoom image in / out.
OK Confirm menu selection.
Joystick Navigate menus.
CANCEL / Back Cancel selection.
RANGE IN / OUT Zoom image in / out.
306

20.5 Camera control

Power up and standby
When the breaker connecting power to the camera is
switched on, the camera will run a boot up sequence
lasting for about 1 minute, after which the camera
will be in Standby mode.
In order for the camera to operate, you must bring
the camera out of standby mode using the camera
controls.
Thermal camera standby
Standby mode can be used to temporarily suspend
the thermal camera's functions when the camera is
not needed for a prolonged period.
When in standby mode the camera does not provide
a live video image.
Enabling and disabling thermal camera standby
With the thermal camera application displayed:
1. Select Menu.
2. Use the Standby menu item to switch the camera
in and out of standby mode.
Note: You can also use any of the camera controls
in the thermal camera application to "wake" the
camera from standby mode.
Pausing the thermal camera image
With the thermal camera application displayed:
1. Select Menu.
2. Select Pause Image.
LightHouse MFD operation instructions