Selecting The Aspect Ratio; Selecting A Location To Store Recordings - Raymarine a65 Operation Instructions Manual

18.8 Selecting the aspect ratio

If supported by your connected camera / video input
device or networked IP camera, you can manually
change the aspect ratio between 4:3 and 16:9.
From the camera application with a feed displayed:
1. Select Menu.
2. Select Adjust.
3. Select Aspect ratio so that 4:3 or 16:9 is selected
as required.
Camera application
18.9 Selecting a location to store
recordings
In order to record, playback or capture a still image
of IP camera feeds you must select the location you
want to save to.
If saving to a memory card ensure that a memory
card with sufficient space is inserted into the relevant
card reader slot.
Note: Do not save files to cartography chart
memory cards.
From the Camera application:
1. Select Menu.
2. Select Set-up.
3. Select Save Files to:.
4. Select the location from the list:
• SD1
• SD2
• Internal (default)
SD1 and SD2 will only be selectable if a memory
card is inserted into the relevant slot.
Note: If your multifunction display only has 1 card
reader slot then only SD1 and Internal is displayed.
279