Transducer Set-Up Menu Options - Raymarine a65 Operation Instructions Manual

15.22 Transducer set-up menu options

The Transducer Set-up menu should be used when setting up your multifunction display for the first time
or when installing a depth transducer.
Note: The settings listed below will only be available if the connected transducer supports the data type.
Menu Item
Transducer
Speed Transducer
Depth Offset
Speed Offset
Temperature Offset
222
Description
Select the appropriate transducer type from those
displayed.
Some transducers may be detected by the system
automatically.
Select the appropriate speed transducer from
those available. This option is only available if
you are not using a combined Depth/Speed or
Depth/Speed/Temperature transducer.
Offset represents the depth of the transducer
relative to:
• Waterline = 0.0 ft and above.
• Keel = 0.1 ft and below.
Offset applied to the speed log.
Offset applied to the temperature transducer
value.
Options
Options available are dependent on the
sonar module connected.
Options available are dependent on the
sonar module connected.
• –9.8 to +9.8 feet — or equivalent units
• 0 to 100%
• –9.9 to +9.9 °F — or equivalent units
LightHouse MFD operation instructions