Multiple Radar Scanners - Raymarine a65 Operation Instructions Manual

2. Once the Radar has powered up, select Tx to
start the Radar transmitting.
Putting the Radar into Standby
The Radar can be placed into Standby mode, which
allows the Radar to remain powered up but not
transmitting.
With the Radar transmitting, from the Radar
application:
1. Select Menu.
2. Select Radar: so that Standby is selected.
The Radar can also be put into Standby mode by
selecting Standby from the Shortcuts page.
Powering down the Radar scanner
The Radar can be powered down from the Shortcuts
page.
With the Radar powered up:
1. Press the Power button.
If you have 2 radar scanners connected; options
for each radar scanner will be shown.
The shortcuts page is displayed:
2. Select Power down radar for the active Radar
scanner.
Radar application

16.3 Multiple radar scanners

The multifunction display supports the use of up to 2
radar scanners on the same network.
For each radar application you can select which
radar scanner is displayed. 2 radar scanners can
be displayed simultaneously by creating a dual
splitscreen radar page on the Homescreen.
Selecting a radar scanner
On systems with 2 radar scanners, you can select
which radar scanner is displayed in each radar
application.
From the Radar application:
1. Select Menu.
2. Select Select Radar option.
3. Select the radar scanner that you want to display
in the current radar application.
The radar selection will be remembered by the
application and will be displayed automatically
the next time that application page is displayed.
229