Installing Drivers For The Citrix Xenserver Hypervisor - Lenovo ThinkServer TD340 Operating System Installation Manual

Installing drivers for the Citrix XenServer hypervisor

To install drivers for the Citrix XenServer hypervisor, do the following:
1. Download the drivers from the Lenovo Support Web site. The most up-to-date device drivers for various
server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Double-click the EXE file to unzip it to a folder. Copy the qla2xxx.iso file to a USB storage device and
connect the USB storage device to your server.
3. Use the following commands to install the drivers:
mkdir -p /mnt/tmp
mount /dev/sdb1 /mnt/tmp
mount /mnt/tmp/qla2xxx.iso /mnt/tmp -o loop,ro
cd /mnt/tmp/
./install.sh
cd /
umount /mnt/tmp
Note: In the command lines, sdb1 represents the drive letter of the USB storage device; qla2xxx.iso
represents the name of the folder where the driver is stored; and install.sh represents the driver name.
Use the corresponding file name on your server.
4. Restart your server.
.
Chapter 2 Installing an operating system in legacy mode
57