Installing The Driver For The Chipset; Installing The Driver For An Ethernet Card; Installing The Driver For An Onboard Graphics Card - Lenovo ThinkServer TD340 Operating System Installation Manual

5. Select the type of installation you need. The following steps are based on the scenario that Custom:
Install the newer version of Hyper-V Server only (Advanced) is selected in this step.
6. In the "Where do you want to install Hyper-V Server?" window, click New.
7. Type the amount of space (in MB), and then click Apply.
8. In the "Microsoft Hyper-V Server Setup" window, click OK.
9. Ensure that the drive partition is correct, and then click Next. The installation begins.
Note: Your server will restart several times during the installation.
10. When the Administrator window is displayed, click OK and set an administrator password.
11. Press Enter. When the message Your password has been changed is displayed, click OK to log in to
the operating system.

Installing the driver for the chipset

To install the driver for the chipset, do the following:
1. Copy the driver for the chipset from the ThinkServer EasyStartup DVD that comes with your server to a
USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver for the chipset:
e:
cd Chipsetwindows
cd Win7
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of the USB storage device and
Chipsetwindows\Win7 represents the subdirectory where your driver is located.
3. If prompted, click Install.
4. Restart your server after the installation is completed.

Installing the driver for an Ethernet card

To install the driver for an Ethernet card, do the following:
1. Download the driver for the Ethernet card from the Lenovo Support Web site. The most up-to-date
device drivers for various server models are always available on the Lenovo Support Web site at:
http://www.lenovo.com/drivers
2. Copy the driver for the Ethernet card to a USB storage device. Connect the USB storage device to
your server.
3. Use the following commands to install the driver:
e:
cd /NIC
Pnputil –i –a *.inf
Note: In the command lines, e: represents the drive letter of the USB storage device and /NIC
represents the subdirectory where your driver is located.
4. Restart your server after the installation is completed.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Copy the driver for an onboard graphics card from the ThinkServer EasyStartup DVD that comes with
your server to a USB storage device. Connect the USB storage device to your server.
2. Use the following commands to install the driver:
24
ThinkServer TD340 Operating System Installation Guide